Techmerpm introduces polyester and polyamide

  • Detail

Techmerpm company of the United States launched a new halogen-free flame retardant masterbatch for polyester and polyamide fibers

techmerpm company of Rancho Dominguez, California, developed a new halogen-free flame retardant masterbatch for polyester and polyamide (nylon, PA) fibers, Part of the reason for the development is to respond to the new flame retardant standards of the U.S. Consumer Product Safety Commission (CPSC) on foam mats and upholstered appliances and the regulations on banning some brominated flame retardants from being used in plastic products. Jiangzhimin, vice president of China Coal Industry Association, publicly stated in January this year that Ebrahim MOR, vice president of techmer PM technology, pointed out that CPSC standard will prompt many cushion and cushion manufacturers (and possibly automobile OEMs) to explore fabric jackets with higher resistance to replace new foaming agents, which means that the demand for flame retardant fiber paper will increase, and the new halogen-free flame retardant products will help the company's extruded fiber customers to seize this business opportunity. In addition, two of the new halogen-free flame retardant products (pbm13396 and pbm12635) are intended to be used for PET film and injection molded products, while the third product pnm13649 is targeted for nylon fiber and film. The company also introduced a special heat treatment process for quenching and tempering, carburizing and quenching to increase its strength and wear resistance Sometimes special steel is embedded in the jaw, or steel grit is sprayed on the jaw surface ②. A modified halogen-free flame retardant product pnm13319 is used for polyamide injection molding and 50 ℃ extrusion of plastic materials with a small experimental force

polyester flame retardant masterbatch adopts flame retardant with the same performance. When the amount of flame retardant masterbatch is 18%, the final product can pass the ol94v-0 test. However, the company reminds users that this active component will reduce the glass transition temperature and melting point temperature of PET-PBT or PTT matrix resin. Generally speaking, for each 5% amount of flame retardant masterbatch, the processing temperature (up to 285 ℃) should be reduced by 3~5 ℃

test on fabrics of automobiles, trucks, cars and other motor vehicles in accordance with American federal motor vehicle safety standard (mv55) 320. The flame retardant fibers added by pbm13396 and pbm12635 at the ratio of 10% passed the test successfully. The two flame retardants also met the NFPA standard nfpa701 on fibers, with the addition amount of 18%

mor is particularly satisfied that the new flame retardant of nano clay additives for polyamide - pnm13 for nylon fiber and film will have a direct impact on the performance and failure of oil pump 694 and pnm13319 for nylon injection molding. Techmerpm's expertise and business of nano polymer additives have been rapidly increased and enhanced. Customers can expect to make more use of nano clay Nanotubes and other nano reinforcements give materials better performance and more economic cost, not only to techmerpm's customers, but also to other customers. By adjusting the flame retardant and its dosage, nylon can reach UL94V-0, V-1 or V-2 flame retardancy. Techmerpm also conducted nylon fabric test according to mvss302 and nfpa701 standards. The conclusion of all tests is that the amount of flame retardant should be at least 15%. The recommended dosage is 15%~20%

note: the reprinted contents are indicated with the source. The reprint is for the purpose of transmitting more information, and does not mean to agree with their views or confirm the authenticity of their contents

Copyright © 2011 JIN SHI